HP ProLiant Network Adapter Scripting Utility (User Guide) - Manual (Page 16)

XML data file 16
<property id="TransmitBuffers" value="750" />
<property id="NetworkAddress" value="" />
<property id="DefaultVlanId" value="1" />
<property id="DefaultVlanTag" value="1" />
<property id="iSCSIVlanId" value="1" />
<property id="iSCSIVlanName" value="HP iSCSI VLAN 1" />
<property id="iSCSIPacketPriority" value="Disabled" />
<property id="iSCSIDHCPEnabled" value="Enabled" />
<property id="iSCSIIPAddress" value="0.0.0.0" />
<property id="iSCSISubnetMask" value="0.0.0.0" />
<property id="iSCSIGateway" value="0.0.0.0" />
<property id="iSCSILAA" value="" />
- <!-- <vlan> element 1
-->
- <vlan>
<property id="VlanId" value="1" />
<property id="VlanName" value="HP VLAN 1" />
</vlan>
</nic>
- <!--
-->
- <!-- Team Data -->
- <!-- -->
- <!-- <team> element 1 -->
- <team relnics="1 2">
<property id="TeamName" value="HP Network Team #1" />
<property id="OpMode" value="Auto" />
<property id="LoadBalAlgorithm" value="Auto" />
<property id="RxPathValidationInterval" value="3" />
<property id="TxPathValidationInterval" value="3" />
<property id="RxPathValidationMode" value="Enabled" />
<property id="TxPathValidationMode" value="Enabled" />
<property id="TeamNetworkAddress" value="" />
<property id="TOEEnabled" value="0" />
<property id="RSSEnabled" value="0" />
<property id="JumboPacket" value="1514 Bytes" />
<property id="IPChecksumOffloadIPv4" value="Rx/Tx Enable" />
<property id="TCPChecksumOffloadIPv4" value="Rx/Tx Enable" />
<property id="TCPChecksumOffloadIPv6" value="Disable" />
<property id="UDPChecksumOffloadIPv4" value="Rx/Tx Enable" />
<property id="UDPChecksumOffloadIPv6" value="Disable" />
<property id="LSOV1IPv4" value="1" />
<property id="LSOV2IPv4" value="0" />
<property id="LSOV2IPv6" value="0" />
<property id="FlowControl" value="Disable" />
</team>
</teamingconfig>