Command line syntax, Command line arguments – HP ProLiant Network Adapter Scripting Utility (User Guide) User Manual
Page 8
Scripting 8
cqniccmd /c<filename>
For target MAC based team member assignment on Windows 2008 only, run the Command Line utility
with the following syntax:
cqniccmd /M<filename>
6.
Check the log file for errors and warnings. The default location of the log file is
\cpqsystem\log\cpqteam.log on the system drive.
To use the utility with the SSST, see the documentation included with SSST on the HP website
Command line syntax
CQNICCMD [[/F] [/C<filename>] [/M<filename>]] [/D] [/L<filename>]
[/P<filename>] [/S<filename>]
[/?]
Only one of the following configuration options can be specified at a time:
•
/S
•
/D
•
/C
•
/P
•
/M
The /L argument can be used with any of the configuration options. The /F argument can only be used with
the /C configuration option.
Command line arguments
Argument
Description
/S
This configuration option causes the source server configuration to be saved. The name of
the XML configuration data file must be specified and the path to the data file must exist. This
option is identical to saving the source server configuration by clicking Save in the Network
Teaming Configuration user interface.
/D
This configuration option causes all teams on the target server to be dissolved, all VLANs to
be removed, and 802.1p/q Packet Tagging to be disabled for all adapters that had no
VLANs. No additional arguments are required or allowed with this option.
/C
This configuration option applies the configuration specified in the data file to the target
system. An existing XML configuration data file must be specified following the target
switch. A space following the switch is optional. Any teams that exist on the target server will
be dissolved before the configuration is applied, all VLANs will be removed, and 802.1p/q
Packet Tagging will be disabled.
/M
Windows 2008 only. This configuration option applies the configuration specified in the
data file to the target system, using target team member MAC address based assignment.
An existing XML configuration data file must be specified following the target switch. A
space following the switch is optional. Any teams that exist on the target server are
dissolved before the configuration is applied, all VLANs are removed, and 802.1p/q
Packet Tagging is disabled.
/P
This option is identical to the /C option, except that the configuration options are not
applied to the target system. This option is useful for syntax checking the XML data file.