Set spanning tree – ADC MM701F User Manual
Page 25
Advertising
Chapter 3: Managing the Modem Using a Web Browser
MM701F User Manual
19
Set Spanning Tree
Spanning Tree eliminates loops in a LAN topology, ensuring that there is only one path (or link)
between any two nodes on a network. Use Spanning Tree protocol only when you have already
selected a Bridge session (as described in
“Set Up WAN Sessions” on page 23
) and when your
LAN has more than one device (a PC only) on your LAN and those devices have more than one
physical path connecting them.
1
Select
System
on the menu bar then click
Configuration
to access the
System Configuration
page
.
2
Select
Enable
to activate the Spanning Tree protocol for all bridging sessions.
Advertising