Saving changes, Saving, Aving – ADC MM701F User Manual
Page 45: Hanges
Advertising
Chapter 3: Managing the Modem Using a Web Browser
MM701F User Manual
39
S
AVING
C
HANGES
Use the
Save Changes
page for saving your current configuration to flash memory. This option
immediately writes all current system configuration to permanent memory (NVRAM). You
cannot selectively write configuration to NVRAM. When you issue the save command, all
current configuration is written to NVRAM.
1
Select
Save Changes
on the menu bar to access the
Save Changes
page.
2
Do one of the following:
•
Click
Save
to write the configuration to flash memory.
•
Click
Cancel
to exit the current page without saving your configuration.
Advertising