AT&T 955 - Manual (Page 20)

DIRECTORY OPERATION
37
DIRECTORY OPERATION
36
Reviewing Information Stored in the Directory
1 Enter the Directory mode.
2 Press + or - to scroll through the directory entries
— OR —
Repeatedly press the dial pad key that has the first character of
the entries you wish to review until the character you are looking
for is displayed. Then press
+ or - to move through the entries
beginning with this character.
For example, to find the entry you stored for Jim in a directory beginning
with an entry for “Aaron,” press
-. The screen displays:
Then press the button for “J;” the screen displays:
NOTE: If there is no entry with the first letter “J,” the screen will display
No Entries for “J”.
Changing Directory Entries
1 Find the directory entry you wish to change by following the
directions under “Reviewing Information Stored in the Directory.”
2 Press t, then use <, > and the dial keypad to edit the
name.
3 Press
S to save the name and move on to edit the phone
number.
4 Use <, > and the dial keypad to edit the number.
5 Press
S to store the name and number in the directory. The
screen displays your new entry and Saved!.
Dialing a Number from the Directory
1 Enter Directory mode and use the dial pad or Navigation buttons
to find the entry for the number you wish to call (see “Reviewing
Information Stored in the Directory”).
2 When the desired directory entry is displayed on the screen,
press
o to place the call (the line is selected automatically)
— OR —
Press the LINE button for the line you wish to select, then press
o to place the call.