AT&T 955 User Manual

Page 29

Advertising
background image

IN CASE OF DIFFICULTY

55

IN CASE OF DIFFICULTY

54

Tone Signals Do Not Activate a Remote Device

Tone signaling does not work during conference calls.

The phone generates tones of fixed duration, which may not be long
enough to activate some devices such as answering machines.

Operation During a Power Failure

This phone will operate during a power failure if a charged battery has
been installed. You will be able to dial and answer calls with the handset
or headset, but no other features will work until power is restored.

No Caller ID Information While on a Call

You must subscribe to

combined Caller ID with Call Waiting as a

single service to see Call Waiting information.

Make sure the TEL SET and TEL LINE cords are not reversed.

Display Screen is Blank

Make sure the power cord is connected to both the phone and an
electrical outlet not controlled by a wall switch.

No Caller ID Information Received

Caller ID information is transmitted by the telephone company between
the first and second rings. Allow your phone to ring at least twice to
receive Caller ID information.

NEW CALL Light Flashes

Make sure you have reviewed all messages on all lines.

It may be a false indicator from the Central Office. To clear, see “Reset
COVM Indicator” in CALLER ID OPERATION.

Screen Displays COVM

The screen displays

COVM when the COVM indicator is turned on for at

least one line, whether or not there are messages waiting, and whether or
not you have the service.

If you subscribe to Voice Mail service with your local telephone
service provider, but prefer not to display COVM on the screen, turn
off the COVM indicator for each line.

If you do not subscribe to Voice Mail service, turn off the COVM
indicator for each line.

See “Turning COVM Indicators On and Off” in SET UP SYSTEM FEATURES.

COVM Line Indicator Remains On

Make sure you have reviewed all messages on that line.

You may have received a false signal from the Central Office. To clear,
see “Reset COVM Indicator” in CALLER ID OPERATION.

Advertising