Actiontec electronic GS204AD9-01 - Manual (Page 16)

13
Chapter 2 Setting Up the Gateway
11. As shown in the next window, get the Black Bag and remove the Power Cord
and Black DSL Cable, then click Next.
☞
Note: Depending on the country, the picture in the previous fig-
ure may or may not reflect the type of power cord supplied.
12. The next window appears. Plug the smaller end of the Power Cord into the
Black Port on the back of the Gateway, then click Next.
13. When the next window appears, plug the larger end of the Power Cord into a
Power Outlet, then click Next.