Actiontec electronic GS204AD9-01 User Manual
Page 38
35
Chapter 4 Basic Setup
6.
Enter the User Name, Password, and Static IP provided by the ISP in the
“DSL Broadband Connection - PPP” screen. Click Next.
☞
Note: If the ISP uses a connection method other than PPPoE
(DHCP or Static IP, for example) see “Advanced Setup” to con-
nect the Gateway.
7.
Click Save and Restart in the “Save and Restart” screen.
8.
The “Congratulations” screen appears. The Gateway is successfully configured.
The power LED flashes rapidly while the Gateway restarts, then glows steadily
green when fully operational. The Gateway is now configured and users can start
surfing the Web.
If an error stating the Web browser was unable to connect to the Internet appears,
check the configuration settings. Ensure all the information required by the ISP is
entered correctly.