Actiontec electronic GS204AD9-01 User Manual
Page 41
38
Actiontec Wireless-Ready DSL Gateway User Manual
4.
In the next screen, read the recommendations. To perform an advanced setup
on the Gateway, click Begin Advanced Setup.
5.
The “Configuring the Advanced Settings” screen appears. To check all the set-
tings, or if unsure of which settings to modify, select Next. To modify a specif-
ic configuration, click on its name in the menu bar on the left.
☞
Note: Click Save and Restart on the bottom left-hand side of
the screen after finishing the configuration of one or more of
the Advanced Setup settings.
WAN IP Address
Selecting
WAN IP
Address in the “Advanced Configuration” screen generates the
“
WAN IP
Address” screen.
WAN IP
Address allows manual set up of the IP address
of the Gateway. There are three ways to do this: Obtain an
IP
Address through
PPP
o
E/PPPoA
, Obtain an
IP
Address Through
DHCP
, and Specify a Static
IP
Address.
☞
Note: Some
DSL
providers use
PPP
o
E/PPPoA
to establish com-
munication with an end user, while others use static
IP
. Cable