HP Intelligent Management Center Licenses User Manual
Page 59
Scenario analysis
The headquarter requires that the branches cannot communicate with one another, but can
communicate with the headquarter. To achieve this purpose, Hub-Spoke networking scheme is
adopted. CE 1 is the headquarter of the company, that is, it is the hub site; CE 2, CE 3 and CE 4
are the three branches, that is, they are spoke sites.
Suppose that the BGP/MPLS VPN backbone where the PEs reside has been established and the
MPLS function has been enabled on the PEs and PE interfaces. To implement hub-spoke networking,
you need to perform the following configurations:
•
PE 1: The management IP address is 10.172.152.1/32, VRF instance vpnHub is associated
with interface Eth 4/1, RD is 10.172.152.1:1001, Import RT is 100:1, Export RT is 100:2
and AS number is 65001.
•
PE 2: The management IP address is 10.172.152.2/32, VRF instance vpnSpoke is associated
with interface Eth 1/0, RD is 10.172.152.2:1001, Import RT is 100:2, Export RT is 100:1
and AS number is 65001.
•
PE 3: The management IP address is 10.172.152.3/32, VRF instance vpnSpoke is associated
with interface Eth 2/0, RD is 10.172.152.3:1001, Import RT is 100:2, Export RT is 100:1
and AS number is 65001.
•
PE 4: The management IP address is 10.172.152.4/32, VRF instance vpnSpoke is associated
with interface Eth 2/0, RD is 10.172.152.4:1001, Import RT is 100:2, Export RT is 100:1
and AS number is 65001.
•
CE 1: The management IP address is 10.172.153.1/32.
•
CE 2: The management IP address is 10.172.153.2/32.
•
CE 3: The management IP address is 10.172.153.3/32.
•
CE 4: The management IP address is 10.172.153.4/32.
Typical applications
59