HP Intelligent Management Center Licenses - Manual (Page 97)

Parameters
•
Level 1 and level 2 thresholds: You can set level 2 threshold only when level 1 threshold is
valid. If the performance level exceeds the threshold, the system generates alarm information.
The alarm severity of level 2 threshold is higher that of level 1 threshold. When the alarm
severity of a performance data goes down from level 2 to level 1, the system generates alarm
restore information.
•
Today: The average performance data collected from 00:00:00 to the current time. If the
current time is 24.12.06 15:30:30, the performance data of today is the average data
collected from 24.12.06 00:00:00 to 24.12.06 15:30:30.
•
This week: The average performance data collected from 00:00:00 on Sunday to the current
time. If the current time is 22.12.06 15:30:30, Friday, the performance data of this week is
the average data collected from Sunday, 17.12.06 00:00:00 to Friday, 22.12.06 15:30:30.
•
This month: The average performance data collected from 00:00:00 on the first day of this
month to the current time. If the current time is 24.12.06 15:30:30, the performance data of
this month is the average data collected from 01.12.06 00:00:00 to 24.12.06 15:30:30.
•
This year: The average performance data collected from 00:00:00 on January 1st of this year
to the current time. If the current time is 24.12.06 15:30:30, the performance data of this
year is the average data collected from 01.01.06 00:00:00 to 24.12.06 15:30:30.
•
Customized data: The average performance data collected from start time of Customized data
to end time of Customized data.
VPN details
In MVM, you can view detailed information about a VPN, including VPN basic information, SC
list in the VPN, PE list in the VPN, CE list in the VPN, VPN performance information, service topology
link and the latest 10 unacknowledged alarms.
Operation procedure
Approach 1
1. Click the Service tab, click MPLS VPN Manager, and then click VPN Resources > VPN
Management in the navigation tree.
2. Click the name of the VPN to be viewed in the VPN list.
Approach 2
1. Click the Service tab, click MPLS VPN Manager, and then click VPN Resources > VPN
Management menu in the navigation tree.
2. Click the name of the VPN to be viewed in the navigation tree.
Approach 3
1. Click the Service tab, click MPLS VPN Manager, and then click VPN Resources > Group
Management menu in the navigation tree.
2. Click the group name node in the navigation tree.
3. Click the name of the VPN to be viewed in the VPN list on the customized group configuration
page.
Approach 4
1. Click the Details link on the connectivity audit details page.
Unacknowledged Alarm: Includes alarms generated by all the devices in the VPN, and the
connectivity alarms and configuration change alarms generated by MVM.
Using MPLS VPN manager 97