HP Intelligent Management Center Licenses - Manual (Page 30)

Parameters
•
Synchronize PE devices before auto discovery: If you select this parameter, the system will
synchronize PE devices before performing automatic discovery, so that the automatic discovery
process can use the updated configuration.
•
Status: Displays the status information of the discovered VPNs. The status can be one of the
following:
◦ Existed: Indicates that system finds new links that belong to the VPN.
◦ New VPN: Indicates that the VPN is newly discovered this time.
•
VPN Name: Uses the VSI name on the device by default. If the VPN name conflicts with an
existing VPN, it uses this format: VPN name-auto incremental number. For example, VPN
name-1, VPN name-2, and so on.
•
VPN-Target List: Displays the VPN-Target Extcommunity information about the BGP VPNs
automatically discovered.
•
VPN Description: For existed VPNs, this parameter displays the VPN description specified in
the L2VPN Manager; for newly discovered VPNs, this parameter is null.
Configure interface binding information
This function allows you to select all AC links to be added to the L2VPN Manager, configure the
link information, and then add the links to the L2VPN Manager.
Operation procedure
•
Method 1:
1.
Select one or more VPNs that need to be configured with the interface binding information,
and then click Next.
2. Click the Modify icon of a link to be configured to enter the link configuration page.
3. Add or modify the CE information and then click OK.
•
Method 2:
1.
Select one or more VPNs that need to be configured with the interface binding information,
and then click Next.
2. Select all VPN links.
3. Select Create non-managed CE automatically.
4. Click Finish.
Configuration guidelines
•
On the link configuration page mentioned in method 1, if there are no devices you want to
select in the pop-up device list, you can add them by clicking the Add Non-Managed CE link
at the right upper corner of the page.
Parameters
•
Create non-managed CE automatically in method 2: After the automatic discovery, you need
to add links. You can select to create a non-managed CE automatically to ensure the finish of
the link configuration in case the CE device of a link cannot be found.
30 L2VPN Manager