Query vpn, Add vpn, Query vpn add vpn – HP Intelligent Management Center Licenses User Manual
Page 65
Functions
•
Query VPN
•
Add VPN
•
Remove VPN
•
Modify VPN
•
Modify VPN audit interval
•
Audit VPN
•
VPN details
•
Troubleshooting
Query VPN
In MVM, operators can query VPN through inputing the conditions.
Operation procedure
1.
Click the Service tab, click MPLS VPN Manager, and then click VPN ResourcesVPN Management
in the navigation tree.
2.
In the <BGP/MPLS VPN List Query > of VPN List Page, type the VPN name, VPN status, audit
status and audit result.
3.
Click Query.
Verification
•
The VPN listed in the VPN list is satisfied with the query condition(s).
Parameters
•
VPN Name: Uniquely identifies the VPN. "--" is a reserved name. It cannot be used.
•
Status: You can select Status or not. If you don't select Status, the default value is 'All Status'.
•
Audit Status: You can select Audit Status or not. If you don't select Audit Status, the default
value is 'All Audit Status'.
•
Audit Result: You can select Audit Result or not. If you don't select Audit Result, the default
value is 'All Audit Result'.
Add VPN
In MVM, operators can monitor, manage, and deploy related VPN networks by adding a VPN.
Operation procedure
1.
Click the Service tab, click MPLS VPN Manager, and then click VPN ResourcesVPN Management
in the navigation tree.
2.
Click Add on the VPN list page.
3.
Type the VPN name, VPN description and audit information.
4.
Click OK.
Verification
•
The newly added VPN is listed in the VPN list.
•
The newly added VPN is shown under the BGP/MPLS VPNVPN List menu in the navigation
tree.
Using MPLS VPN manager
65