HP Intelligent Management Center Licenses - Manual (Page 73)

Verification
•
On the AS Information or the Region Information page, you can see the successfully imported
P devices.
•
In the global topology, you can see the successfully imported P devices.
Precautions
•
MVM allows only one device import operation (P, PE, CE, MCE or VMCE import) at a time.
During device importing, you can quit the operation. However, the started import operation
is still running on the server background. If you start a new import operation before the system
completes the previous one on the server background, the system prompts that an import
operation is running.
•
Each device can be imported as one type at a time. For example, if a device is imported as
a CE, you can import the device as a PE only after you remove the device from the CE device
list.
Remove P
Remove a P device from MVM, this P device will be removed from the related AS. After a P device
is removed, this P device and all links related with this P device are removed from the network
topology.
Operation procedure
1. Click the Service tab, click MPLS VPN Manager, and then click VPN Resource > Region
Management in the navigation tree.
2. On the AS list page, click an AS name link in the list to enter the Sub-region/PE Device list
page.
3. Click the Delete icon related to the P device which will be removed, Confirm and finish the
operation.
Management VPN configuration
Management VPN configuration allows users to set the RT value of the management VPN, and set
the Enabled/Disabled status. The configuration is to avoid RT conflict with the management VPN
during auto discovery and SC creation.
Operation procedure
1. Click the Service tab, click MPLS VPN Manager, and then click VPN Resource > Management
VPN in the navigation tree.
2. Set the Enabled/Disabled status of the management VPN.
3. When the management VPN is enabled, you can set HUB's Import RT and HUB's Export RT.
4. Click OK.
Parameters
The values of HUB's Import RT and HUB's Export RT need to comply with the RT format requirements
and cannot be duplicate with the RT values used by existing SCs
Manage PE
PEs are the most important device resource in MVM. All VPN information is acquired from PEs to
discover VPN and VPN links, and the VPN network deployment is performed on PEs, too. Click
Using MPLS VPN manager 73