HP Intelligent Management Center Licenses - Manual (Page 82)

Add link
You can select all the VPN links and add them to MVM after finishing the link configuration
Operation Procedure
Approach 1:
1. Select the VPNs to add links to. Then click Next.
2. Select VPN links one by one for the selected VPN, and click the Configure link to add or
modify CE information for the VPN links with incomplete information.
3. Click OK.
Approach 2:
1. Select the VPNs to add links to. Then click Next.
2. Select VPN links one by one for the selected VPN.
3. Select Create non-managed CE automatically.
4. Click OK.
Parameters
•
Create non-managed CE automatically: You can select to create non-managed CEs automatically
to add VPN links if CEs cannot be found on the link that has been added after auto discovery.
•
CE Interface: Physical Interface connected to PE, VMCE or MCE.
•
VMCE Interface linked to up device: Physical interface connected to up device.
•
VMCE Interface linked to down device: Physical interface connected to down device.
•
MCE Interface linked to PE: Physical interface connected to PE.
•
MCE Interface linked to CE: Physical interface connected to CE.
•
Add Non-Managed CE: If the CE device on a VPN link cannot be managed, you can click
this link to create a non-manageable CE to add a VPN link.
•
Add VMCE Configuration: If there are no MCE on a VPN link, you can click this link to add
VMCE Configuration to create a VMCE to a VPN link.
Precautions
•
To discover a link with VMCE, you must import the corresponding VMCE device or create a
non-managed VMCE before auto discovery.
•
To discover a link with MCE, you must import the corresponding MCE device before auto
discovery.
•
For VMCE networking scheme, if no VMCE is discovered, follow the operation procedure for
discovering PE-CE links.
•
For MCE networking scheme, if no MCE is discovered, follow the operation procedure for
discovering PE-CE links.
VPN monitoring
MVM provides the VPN monitoring function to display status of network elements in access topology.
These status include whether VPN configuration has changed, whether PE synchronization is
successful and whether VRF configuration of a link to be added exists on a PE.
Inter-CE connection and connectivity are displayed in service topology on real time. MVM will
inform you of the changes of configurations in access topology and changes of inter-CE connectivity
in service topology.
82 MPLS Manager