HP Intelligent Management Center Licenses - Manual (Page 89)

Parameters
•
Link configuration: Configuration information of the SA on the PE, including interface information
and information of the bound VRF.
•
Manager configuration: Current configuration of the MVM.
•
Current configuration of the device: Configuration obtained from the latest synchronization.
Service deployment
MVM provides an easy way to deploy VPN services, with simple and friendly operation procedures.
Maintainers do not have to go to different labs or use command lines to configure VPN, and
therefore the time and working load for maintenance are reduced a lot.
Service deployment involves SA deployment and SA undeployment. MVM can both deploy a
complete VPN network and perform partial adjustment on a VPN network with network basic
information configured. After the deployment, you can query inter-CE connectivity in VPN topology
to verify your deployment.
MVM provides an easy way to deploy and undeploy VPN links in global topology and deployment
status will be displayed in the global topology on real time.
Operation procedure
1. Click the Service tab, click MPLS VPN Manager, and then click VPN Resources > SA
Management in the navigation tree.
2. Click Add to enter the Deploy SA page.
3. Click Remove to remove the selected SAs from the SA list.
4. Click Deploy to deploy the selected SAs in the SA list.
5. Click Undeploy to undeploy the selected SAs in the SA list.
6. Click the Query Type drop-down list to select a query type, and then type query condition,
and click Query.
7. Click the Modify icon to enter the Modify SA page only if the SA is undeployed or failed
deployed.
8. Click the View icon to view the detail of SA.
9. Click the Change Configuration icon to view the changed configuration only if the configuration
of SA was changed.
Precautions
•
SA links include the following states: Deployed, Configuration Changed, Link Invalid,
Undeployed, Deploying/Undeploying, Deployment Failed, and Undeployment Failed. In
topologies, deployed SA links are displayed in solid lines, SA links in the Configuration
Changed state are displayed with the icon, invalid SA links are displayed with the Delete
icon, undeployed SA links are displayed in dotted lines, SA links in the Deploying/Undeploying
state are displayed with the icon, and SA links in the Deployment/Undeployment Failed state
are displayed with the
icon. When an SA link no longer belongs to a VPN due to a binding
failure or RT value change, the MVM considers the link as invalid.
•
You can modify configurations of a link undeployed, remove the link, or deploy the link
immediately to the device.
•
Link status is displayed as Normal after you successfully deploy an SA, and the link is removed
from global topology and SA list after you remove deployment of the link.
•
You can query failure information for the SA failed to be deployed or failed to be undeployed.
Using MPLS VPN manager 89