HP xw4400 Workstation User Manual
Page 31
Advertising
7.
After an array has been created, the utility gives options for managing it through the View
Existing Array menu. Viewing the array displays various properties of the RAID array, including
the disks present and their status.
Figure 6-6
LSI Logic MPT Setup Utility – View array
8.
Select Manage Array and press
Enter
to use the management features. From here, the disks that
are configured to be hot spares can be managed, the array can be activated, deactivated, or
deleted, and if the array is not at an Optimal status due to a disk failure or other problem, it can
be synchronized from this menu.
Figure 6-7
LSI Logic MPT Setup Utility – Manage array
LSI 3041E and Integrated LSI 1064/1068 Setup
27
Advertising
This manual is related to the following products:
- xw6200 Workstation xw4550 Workstation xw8400-Workstation Workstation xw4100 xw6600 Workstation xw6400-Workstation xw8200 Workstation Z800 Workstation Z400 Workstation Workstation xw6000 xw4200 Workstation xw4600 Workstation xw3400 Workstation Z600 Workstation xw9300 Workstation xw4300 Workstation Workstation xw8000 xw8600 Workstation xw9400 Workstation