HP SAN - Manual (Page 11)

2. Select HP Storage SAN Visibility from the list of Currently Installed Programs.
3. Click Change, and select Repair and follow the steps to repair the program.
NOTE: WMI Mapper cannot be repaired from Add/Remove programs directly . At the time of
repairing SAN Visibility, WMI Mapper is also repaired internally.
Removing SAN Visibility
To remove the HP Storage SAN Visibility software, complete the following steps:
1.
Select Start > Settings > Control Panel > Add or Remove Programs.
2. Select HP Storage SAN Visibility from the list of Currently Installed Programs.
NOTE: Before removing HP Storage SAN Visibility from your system, ensure that you close
all the applications.
3. Click Change, and select Remove and follow the steps to remove the program.
WARNING! While un-installing, SAN Visibility uninstalls the WMI Mapper installed by the
SAN Visibility installation.
4. A message is displayed confirming the successful removal of the SAN Visibility software.
NOTE: Removal of SAN Visibility does not remove the existing SAN Visibility reports and profiles
from the installation directory.
Removing SAN Visibility 11