HP SAN - Manual (Page 18)

Figure 6 Brocade AG mode switch example
Modifying switch details
To modify switch details:
1.
Select the switch you want to modify from the SAN explorer area to view its details.
2. Modify the switch details as required.
3. Click Update to save the modified switch details.
Removing a switch
To remove a switch from the component group:
1.
Select the switch you want to remove from the SAN explorer area.
2. Right-click and select Remove from the pop-up menu, as shown in Figure 7 (page 18) .
3. The Delete Confirmation window is displayed with the following message:
Do you want to delete the XYZ switch?
•
Click Yes, to delete the switch.
•
Click No, to cancel the deletion.
The switch is removed from the component group.
Figure 7 Removing switch
18 Using SAN Visibility