HP SAN - Manual (Page 16)

To enter the Component Group Name:
1.
Enter the name of your component group in the Component Group Name box. The default
component group name, MyComponentGroup, is displayed in the Component Group Name
box, as shown in
Figure 4 (page 15) .
2. Click Add. The component group name appears in the SAN explorer area under the SAN
name.
NOTE: To add multiple component groups under the SAN, repeat the steps 1-2.
3. Click Rename, to rename the existing Component Group name accordingly:
1. Select a Component Group Name from the SAN explorer area.
2. Replace the name in the Component Group Name box.
3. Click Rename.
4. The Confirmation window is displayed with the following message:
Do you want to rename the Component Group name "MyComponentGroup"
to XYZ?
•
Click Yes, to rename the Component Group name.
•
Click No, to cancel and not rename.
4. Click Next to enter the switch details.
Supporting switch details
The Switch Settings window enables you to search, add, and modify all the connected switches.
Figure 5 (page 16) shows the Switch Settings window.
Figure 5 Switch Settings window
16 Using SAN Visibility