HP CD-Writer Plus Internal 9310i Drive - Manual (Page 12)

10 How to Connect an Audio Cable
How to Connect an Audio Cable
You do not need an audio cable to record music.
The audio cable is used only for listening to music
CDs through your computer’s sound system.
When the CD-Writer Plus drive records music or
data, it uses the data cable, not the audio cable.
Using an existing audio cable
If your sound board already has a spare audio cable with an MPC-2
connector (shown above), plug the MPC-2 connector into the Audio
opening on the back of the CD-Writer Plus drive.
Adding an audio cable
When using a different audio cable, make sure the cable has the proper
connectors that fit both your sound card and the CD-Writer’s Audio
connector. The CD-Writer Plus requires an MPC-2 connector. Attach the
connector to the drive as shown.
MPC-2 connector
Audio cable