Changing between view mode and modify mode, Computer), Figure 18 – HP XP20000XP24000 Disk Array User Manual
Page 40
Figure 18 Internet Explorer Message (when Logging In to the SVP from a Windows
Server 2003 Computer)
Changing Between View Mode and Modify Mode
Remote Web Console has two operation modes: Modify mode and View mode.
•
View mode lets you view settings of the storage system. The operation mode is View mode when
you log in to Remote Web Console.
•
Modify mode lets you lock the setting operation of other users so that they cannot change the
settings of the storage system.
Only one user can be in Modify mode for each storage system. While a storage administrator is in
Modify mode, any other users can only view the storage system information in View mode. If the storage
system is partitioned, only one user can be in Modify mode for each SLPR. Any other users in the
allocated SLPR can only view the storage system information in View mode.
On most of the windows, you must operate in Modify mode to change the settings of the storage system.
Except for some windows, you can change the settings of the storage system in View mode.
In either mode, you need the operation authority of the function to change the settings
of the storage system. For detailed information on setting the operation authority, see
Changing User Operation Authority
This section describes how to switch the operation mode and change the settings of the storage system in
View mode.
To change between View mode and Modify mode:
icon is displayed, which indicates that the storage system is unlocked.
1.
Verify that the
2.
Click the Mode Changing icon, which should be in View mode (
Once you are in Modify mode, the Mode Changing icon changes from a gray background to
a yellow background ( ), and the Locked icon ( ) is displayed. Also a progress bar that
shows the remaining time period for Modify mode is displayed on the Remote Web Console
main window (see “
Extending the Modify Mode Timeout Period
3.
Once you have applied your desired changes, change back to View mode. Click the Mode
Changing icon ( ).
•
Notes on changing the settings of the storage system in View mode
40
Installation Requirements and Procedures
).