HP XP20000XP24000 Disk Array - Manual (Page 73)

• Capacity: Volume capacity. For an expanded (LUSE) volume, the total capacity of the LDEVs
that consist of the LUSE volume is displayed.
• RAID: RAID level.
• Paths: Number of LU paths.
LDEV Window
For more detailed information about the displayed items, see the HP StorageWorks XP24000 Virtual
LVI/LUN (VLL) and Volume Shredder User's Guide.
Figure 34 The LDEV Window (Reports Display)
The displayed items on the LDEV dialog box are as follows:
• SLPR drop-down list:
You can display information about a particular SLPR when you select the SLPR from the SLPR
drop-down list. If you have logged on as a storage partition administrator, only information about
the allocated SLPR is displayed, and you cannot select other SLPRs from this drop-down list.
• CU or PG:
You can choose which information to display in the LDEV list.
• If
you click CU, two drop-down lists are displayed. You can select an LDKC from the drop-down
list on the left, and a CU from the drop-down list on the right.
• If you click PG, one drop-down list is displayed. You can select the parity group to display
from the drop-down list.
• LDEV list:
The following items are displayed in the LDEV list:
• SLPR: SLPR number and SLPR name.
• CLPR: CLPR number and CLPR name.
• LDKC:CU:LDEV: The LDKC number, the CU number, and the LDEV number are displayed. See
“ LUN Window ” on page 71 for the displayed icons.
• Emulation: Emulation type. For an expanded (LUSE) volume, the emulation type of the each
LDEV is displayed.
• MAX LBA: LDEV size recognized by a host.
XP24000 Remote Web Console User’s Guide 73