HP NonStop G-Series - Manual (Page 143)

NonStop AutoTMF Software Commands
HP NonStop AutoTMF Software User’s Guide—429952-014
6-69
MODIFY AUTOTMF
CLEAR
clears the log file of existing data.
STOP
closes the current log file and stops logging.
MODIFY AUTOTMF
Copies all entries of the tables that were defined for system nodename and creates the
same entries for the local system. First move the ATMFFILE and ATMFPROG tables to
the MAPDB and then issue the MODIFY AUTOTMF command.
If a configuration entry is already defined on the local system, that configuration entry
is not copied from the original system.
nodename
the Expand node name of the original system.
LISTALL
displays the entries that are being modified in ATMFATTR and ATMFPROG.
MODIFY GLOBALS
Copies all the global parameters that were defined for system n and creates the same
global parameters for the local system. If a global parameter is already defined for the
local system, the parameter is not updated with the value that was configured on the
original system n.
n
the original system number.
LISTALL
displays the value of the global parameters being modified.
MODIFY AUTOTMF REPLACE NODENAME nodename [ , LISTALL ];
Note. The command assists you in migrating the configuration of NonStop AutoTMF software
file and program attributes to a new system. For details on migration procedures, see
“Migrating the NonStop AutoTMF Software Configuration to a New System” on page A-7
MODIFY GLOBALS REPLACE SYSTEMNUMBER n [, LISTALL ];
Note. The command assists you in migrating the configured global parameters to a new
system. For details on migration procedures, see “Migrating the NonStop AutoTMF Software
Configuration to a New System” on page A-7