HP NonStop G-Series - Manual (Page 166)

NonStop AutoTMF Software Commands
HP NonStop AutoTMF Software User’s Guide—429952-014
6-92
STATUS
Activities that are logged include:
•
Starting and stopping the log.
•
Any errors obtaining configuration information from MapDB.
•
Monitor opens and closes by requesting processes.
•
The result of ATMFFILESET and ATMFPROGRAM configuration requests.
•
Any mismatch between an NonStop AutoTMF software runtime library and the
monitor or MapDB.
•
Fault tolerance process events, such as a backup process takeover.
•
Local CPU failures and reloads.
•
Remote network status changes
STATUS
Displays information about various objects.
PROCESS
requests information about the monitor process.
LOG
requests information about the monitor log file, if any.
LICENSE
requests information about the NonStop AutoTMF software license for the current
system.
TRACE
requests information about the currently specified trace, if any. This command has
been replaced by the ESCORT CI command
STATUS TRACE .
SECURITY
Instructs the monitor to accept further commands only from a specific set of process
access ids.
Note. Information in the activity log is for informational and diagnostic purpose. It is not
intended to be an official or reliable record for continuing management or control purposes.
The content and format of the log is subject to change without notification.
MONITOR STATUS { PROCESS | LOG | LICENSE | TRACE }
MONITOR SECURITY { N | C | U | A | G | O | - }