HP Virtual Connect 8Gb 24-port Fibre Channel Module for c-Class BladeSystem - Manual (Page 23)

Command line 23
Item Description
EnclosureID
(required)
The enclosure ID of the remote enclosure to be removed from the domain. Use "*"
to remove all remote enclosures in the domain. The enclosure IDs can be
identified for a particular enclosure by using the show enclosure command.
The local enclosure cannot be removed from the domain with this command.
Examples
->remove enclosure encl
Removes a remote enclosure
->remove enclosure *
Removes all remote enclosures from the domain
Item Description
show enclosure Display all enclosures in the domain.
Syntax
show enclosure [<EnclosureID>|*]
Parameter
EnclosureID
(optional)
The ID of an enclosure in the domain. If specified, only details for that enclosure
appear.
Examples
->show enclosure
Displays a summary of all enclosures
->show enclosure *
Displays detailed information for all enclosures
->show enclosure enc0
Displays detailed information for a specific enclosure
enet-connection
Manage Ethernet network connections.
Supported actions: add, help, remove, set, show
Item Description
add enet-connection Add a new Ethernet network connection to an existing server profile.
The maximum number of Ethernet connections that can be added to a
server profile is 128.
Syntax
add enet-connection <ProfileName>
[Network=<NetworkName>]
[PXE=<enabled|disabled|UseBios>]
[AddressType=<Factory-Default|User-Defined>]
[EthernetMAC=<MAC Address> iScsiMAC=<MAC Address>]
[SpeedType=<Auto|Preferred|Custom>] [Speed=<speed>]
Parameter
ProfileName (required) The name of an existing profile to which the new connection is added
Properties
Network (optional) The name of an existing network to associate with the connection. If the
network name is not specified, or is set to "unassigned", the network
remains unassigned and can be assigned later.
PXE (optional) Enables or disables PXE on the network connection. Valid values are
"enabled", "disabled", and "UseBios". If not specified, the default is
"UseBios".
Only one connection can have PXE enabled per profile.