HP Virtual Connect 8Gb 24-port Fibre Channel Module for c-Class BladeSystem - Manual (Page 43)

Command line 43
Item Description
->set iscsi-boot-param MyProfile1:1 BootOrder=Primary
Lun=100
InitiatorName="iqn.2009-09.com.someorg.iSCSI-Initiator"
InitiatorIp=192.128.3.1 Mask=255.255.0.0
TargetName="iqn.2009-09.com.someorg.iSCSI-Target"
TargetIp=192.128.3.2 TargetPort=40000 Authentication=CHAP
Username=SomeUserName Secret=SomePassword123
Configures basic boot attributes on an iSCSI connection of profile MyProfile1
->set iscsi-boot-param MyProfile1:1 BootOrder=Primary
ISCSIBootParamDHCP=Enabled NetworkParamDHCP=Enabled
DHCPVendorID=SomeVendorIDValue
Configures iSCSI Boot attributes to be retrieved from DHCP
->set iscsi-boot-param MyProfile1:1 -maskSecret
-maskMutualSecret Authentication=CHAPM
Username=SomeUserName MutualUsername=SomeMutualUsername
ISCSIBootParamDHCP=Enabled NetworkParamDHCP=Enabled
DHCPVendorID=SomeVendorIDValue
Configures CHAP secret and CHAPM secret values as a masked string
Item Description
show iscsi-boot-param Display the basic iSCSI boot parameters configured on the specified iSCSI
connection.
Syntax
show iscsi-boot-param [<ConnectionID>]
Parameter
ConnectionID
(optional)
The ID of an existing iSCSI connection. The ID format is <ProfileName:Port>.
Use show profile <ProfileName> or show iscsi-connection
<profileName:*> to display the port number of the iSCSI connection.
Examples
->show iscsi-boot-param MyProfile1:1
Displays boot parameters configured on connection 1 of MyProfile1
->show iscsi-boot-param MyProfile1:*
Displays boot parameters configured on all connections of MyProfile1
->show iscsi-boot-param *
Displays boot parameters configured on all profiles in the domain
iscsi-connection
Manage iSCSI connections.
Supported actions: add, help, remove, set, show
Item Description
add iscsi-connection Add a new iSCSI connection to an existing server VC profile. This command can
be executed only if the current VC domain is managing one or more Flex-10
modules.
Syntax
add iscsi-connection <ProfileName>
[Network=<NetworkName>]
[AddressType=<Factory-Default|User-Defined>]
[iScsiMAC=<MAC Address>]
[SpeedType=<Auto|Preferred|Custom>] [Speed=<speed>]
Parameter