HP Virtual Connect 8Gb 24-port Fibre Channel Module for c-Class BladeSystem - Manual (Page 65)

Command line 65
Item Description
Direction (optional) The direction of network traffic on the port being monitored. Valid values include
"ToServer", "FromServer", and "Both".
Examples
->set port-monitor AnalyzerPort=enc0:3:1 Speed=1Gb
Duplex=half
Modifies network analyzer uplink port properties
->set port-monitor MonitorPort=enc0:1:6 Direction=ToServer
Modifies a monitored server port
->set port-monitor Enabled=true
Enables port monitoring
->set port-monitor Enabled=false
Disables port monitoring
Item Description
show port-monitor Display the Virtual Connect port monitor configuration.
Syntax
show port-monitor
Example
->show port-monitor
Displays the port monitor configuration
profile
Manage server profiles.
Supported actions: add, assign, copy, help, load, remove, save, set, show, unassign
Item Description
add profile Create a new server profile. After the profile is created, the profile can be
configured using the "set" subcommand, and additional network, fabric, and FCoE
connections can also be added. The server profile can also be assigned to a device
bay using the assign subcommand.
Syntax
add profile <ProfileName> [-NoDefaultEnetConn]
[-NoDefaultFcConn] [-NoDefaultFcoeConn] [Nag=<nagName>]
[SNType=<Factory-Default|User-Defined>]
[SerialNumber=<serialnumber>] [UUID=<uuid>]
Parameter
ProfileName The unique name of the new server profile to create
Options
NoDefaultEnetConn Do not add default Ethernet network connections when creating the server profile.
NoDefaultFcConn Do not add default FC SAN connections when creating the server profile.
NoDefaultFcoeConn Do not add default FCoE SAN connections when creating the server profile.
Properties
Nag (optional) The network access group for the profile. The default is the domain Default network
access group.
SNType (optional) The source of the serial number assignment to be used during the profile creation.
If not specified, the serial number is assigned according to the Virtual Connect
default domain settings. Valid values include "Factory-Default" and "User-Defined".
SerialNumber
(required if the
SNType is
A custom user-defined serial number associated with the server profile. When the
profile is assigned to a device bay that contains a server, the server inherits the