HP Virtual Connect 8Gb 24-port Fibre Channel Module for c-Class BladeSystem - Manual (Page 75)

Command line 75
Item Description
show server Display all servers in the domain.
Syntax
show server <ServerID|*>
Parameter
ServerID (optional) The ID of a server in the domain. The format of the server ID is
<EnclosureID:Bay>. If the EnclosureID is not specified, the local enclosure is
used by default. For a multi-blade server, the ServerID must be that of the monarch
bay. This is the ID shown in the summary listing.
Examples
->show server
Displays a summary of all servers
->show server *
Displays detailed information for all servers
->show server enc1:*
Displays detailed information for all servers in a remote enclosure
->show server enc0:4
Displays detailed information for the server in device bay 4 of the local enclosure
->show server enc0:5
Displays detailed information for the multi-blade server in bays 5-8 of the local
enclosure
serverid
Manage virtual server ID configuration settings.
Supported actions: help, set, show
Item Description
set serverid Modify virtual server ID domain settings. The serial number attributes can be
changed only in one of the following scenarios:
• The virtual server ID source type is "Factory-Default".
• The virtual server ID source type is "VC-Defined" or "User-Defined", but no
profiles are using server IDs from this source.
• The virtual server ID source type is "User-Defined", and the range is being
extended by lowering the start value or increasing the end value.
Syntax
set serverid Type=Factory-Default
set serverid Type=VC-Defined [PoolID=<1-64>]
set serverid Type=User-Defined Start=VCX01nnnnn
End=VCX01nnnnn
Properties
Type (required) The type of the virtual serial number source. When server profiles are created, the
UUID values are not allocated from the pool, the virtual serial number is allocated
from the pool; and the virtual UUID is randomly generated. Valid values include
"Factory-Defined" (default), "VC-Defined", and "User-Defined".
PoolID (optional) The VC-Defined Pool ID to be used. If not specified, the default Pool ID is 1. This
property is only valid for VC-Defined serial number types.
Start (required if
Type is
User-Defined)
The starting serial number in a user-defined range. This property is only valid for
User-Defined serial number types. User-Defined serial number ranges should start
with the pattern VCX01.
End (required if Type
is User-Defined)
The ending serial number in a user-defined range. This property is only valid for
User-Defined serial number types. User-Defined serial number ranges should start