HP StorageWorks XP Remote Web Console Software - Manual (Page 136)

To display the Pair Operation window, do either of the following:
•
If Universal Replicator has not been started:
1.
Use your Web browser to display the storage device list. In the storage device list, select
the storage system to log in. Enter a user name and the password, and then click OK.
The XP Remote Web Console main window is displayed.
NOTE: For detailed instructions on this step, see XP Remote Web Console user’s guide.
2. Click Go, Universal Replicator for Mainframe and then Pair Operation on the menu bar
of the XP Remote Web Console main window.
URz starts and the Pair Operation window is displayed.
3. If Universal Replicator has already been started:
Select the Pair Operation tab.
The Pair Operation window is displayed.
Figure 61 Pair Operation Window
The Pair Operation window displays the following information:
•
Tree: Lists LDKCs and lists CU images under the LDKC in the local storage system ( ).
If you select a CU image, the list displays volumes for the CU image. You can select only one
CU image at one time and cannot select two or more simultaneously.
•
Upper-right buttons: The following buttons appear at the upper-right corner of the window:
Display Filter: Displays the Display Filter window (see “Display Filter Window” (page 141) ).
This window allows you to narrow information in the list, so that the list displays only the
◦
volumes that satisfy certain conditions. For detailed information, see Filtering Information
in the List in the Pair Operation Window .
◦ Export: Saves information about volume pairs in a text file. For detailed information, see
Saving Pair Status Information into a Text File .
136 Performing URz Pair Operations