HP Integrity NonStop H-Series - Manual (Page 41)

Operating the Tape Drive
N1525A ACL Installation and User’s Guide — 527339-003
3 -7
Buttons
Default Screen
After the POST diagnostics conclude successfully, and initialization is complete,
the default screen appears (See
Figure 3-4 .)
The first line of the Default screen shows the status of the LTO tape drive within
the unit. Possible status conditions are:
•
No Tape
•
Idle
•
Rewinding
•
Seeking
•
Reading
•
Writing
•
Erasing
•
Cleaning
Figure 3-4. Default Screen