HP Integrity NonStop H-Series - Manual (Page 70)

Operating the Tape Drive
N1525A ACL Installation and User’s Guide — 527339-003
3- 36
Loading and Unloading Tape Cartridges
Press Enter to select LTO1. In Figure 3-24 , two changes occur in the display:
•
The * reappears at the beginning of line 2, indicating that a selection has
been made.
•
The cursor now moves to line 4, indicating that a destination has been
selected.
Press Enter to select Slot 1 as the destination. An arrow appears at the end of
line 4. Additional choices are available because:
•
A tape drive has been selected as the source, so the destination must be a slot.
•
All of the slots except Slot 1 are empty, so a list of remaining empty slots appears
below Slot 2.
Figure 3-24. Load/Unload To Entry Screen