HP MSR Encryption Accelerators - Manual (Page 32)

Setting up SNMP for Linux 32
# 13 = update
InfoState = 2
InfoInternalTemp = 45
InfoAmbientTemp = 35
InfoWearoutIndicator = 2 ; 2=normal, 1=device is wearing out.
InfoWritableIndicator = 2 ; 2=normal, 1=non-writable, 0=write-reduced, 3=unknown
InfoFlashbackIndicator = 2 ; 2=normal, 1=flashback protection degraded.
ExtnTotalPhysCapacityU = 23
ExtnTotalPhysCapacityL = 215752192
ExtnUsablePhysCapacityU = 21
ExtnUsablePhysCapacityL = 7852192
ExtnUsedPhysCapacityU = 4
ExtnUsedPhysCapacityL = 782330816
ExtnTotalLogCapacityU = 18
ExtnTotalLogCapacityL = 2690588672
ExtnAvailLogCapacityU = 14
ExtnAvailLogCapacityL = 3870457856
ExtnBytesReadU = 18
ExtnBytesReadL = 3690588672
ExtnBytesWrittenU = 4
ExtnBytesWrittenL = 2578550816
InfoHealthPercentage = 95
InfoMinimalModeReason = 7 ; 0=unknown, 1=fw out of date, 2=low power, ; 3=dual
plane failure, 5=internal, 6=card limit, ; 7=not in minimal mode, 8=unsupported
OS,; 9=low memory
InfoReducedWriteReason = 0 ; 0=none, 1=user requested, 2=no md blocks, ; 3=no
memory, 4=failed die, 5=wearout, ; 6=adapter power, 7=internal, 8=power limit
InfoMilliVolts = 12000
InfoMilliVoltsPeak = 12100
InfoMilliVoltsMin = 11900
InfoMilliWatts = 6000
InfoMilliWattsPeak = 15000
InfoMilliAmps = 500
InfoMilliAmpsPeak = 1000
InfoAdapterExtPowerPresent = 1 ; 1=present, 2=absent
InfoPowerlossProtectDisabled = 2 ; 1=powerloss protection available but disabled
; 2=any other powerloss protection condition