HP MSR Encryption Accelerators User Manual
Page 46
Utilities 46
CAUTION:
Output Change
Starting with version 3.0.0 and later, the standard formatting of fio-status output has
changed. This will affect any custom management tools that used the output of this utility.
Basic information: If no options are used, fio-status reports the following basic information:
•
Number and type of devices installed in the system
•
IO Accelerator version
Adapter information:
•
Adapter type
•
Product number
•
External power status
•
PCIe power limit threshold (if available)
•
Connected IO Accelerator devices
Block device information:
•
Attach status
•
Product name
•
Product number
•
Serial number
•
PCIe address and slot
•
Firmware version
•
Size of the device, out of total capacity
•
Internal temperature (average and maximum, since IO Accelerator load) in degrees Centigrade
•
Health status: healthy, nearing wearout, write-reduced or read-only
•
Reserve capacity (percentage)
•
Warning capacity threshold (percentage)
Data volume information: If the -d option is used, the following data volume information is reported in
addition to the basic information:
•
Physical bytes written
•
Physical bytes read
All information: If the -a option is used, all information is printed, which includes the following information
in addition to basic and data volume information.
Adapter information:
•
Manufacturer number
•
Part number
•
Date of manufacture
•
Power loss protection status
•
PCIe bus voltage (average, minimum, maximum)