HP Netserver E Server series - Manual (Page 8)

Chapter 1 Quick Start
4
Part 1. Setup at the Client Workstation
¨ Step 1 Start Setup
Insert the HP NetServer Navigator CD-ROM in your Support Anywhere
Client's CD-ROM drive. From the Windows Program Manager, run
setup.exe located in the HPSA\US\CONSOLE\DISK1 subdirectory.
A welcome screen directs you to close all currently active Windows
applications.
¨ Step 2 Choose Installation Option
For a first time installation, choose the default option, Initial Install. For
servers running Novell NetWare/IntranetWare, Support Anywhere setup
installs both client and server(s) software.
¨ Step 3 Select Directory for Support Anywhere
Support Anywhere presents you with the default: C:\PROGRAMf\HPSA.
Setup copies its program files to the selected directory.
¨ Step 4 Select a Web Browser
Setup checks your Windows configuration and, if possible, identifies your
current web browser. You can use the identified browser, or select a new
one.
¨ Step 5 Server List Configuration
Identify and configure your web and non-web servers. Click Create or
Update List. For web-based management, you need to identify the IP
address, the SNMP community and, if appropriate, the IPX address for
each selected server.
◊ In an environment that includes Windows NT servers, Windows NT
web servers can support your non-web servers, including both Novell
NetWare/IntranetWare and Windows NT. Continue to Step 6.
◊ In an exclusive Novell NetWare/IntranetWare environment, all HP
NetServers must include web server software for web-based
management. If this describes your network, client installation is
finished. Please read "Before Proceeding to Part 2," for HP
NetServer installation.