HP Netserver E Server series - Manual (Page 9)

Chapter 1 Quick Start
5
¨ Step 6 Configure Web Servers
You can manage non-web servers over the web using Windows NT
NetServers. Select a web server, and then identify all the non-web servers
it will support. If you have listed NetWare servers, setup will include them
as well.
¨ Step 7 Print Out Windows NT Server List
At the end of Client setup, a text file (based on information you entered
during setup) lists your managed Windows NT servers and your client
address information including host name, IP address, and IPX address. Be
sure to print this file. You'll need the information to install the SNMP
agent software on your HP NetServers running Windows NT.
Before Proceeding to Part 2: When HP Support Anywhere Client setup is
finished, the Support Anywhere icon appears in the display, or, in Windows 95,
on the program bar. Leave the client operational; installation is not complete.
As soon as Support Anywhere's Auto Alert feature is launched, the program
starts regular periodic polling of all NetServers on the servers list. At this point,
each listed server posts a Server Down Auto Alert notice because installation has
not yet been completed at your NetServers.
You still need to install the Server software at each Windows NT server you
want to monitor with Support Anywhere. In addition, all listed NetServers must
be restarted.
Part 2. Setup at Each HP NetServer
HP NetServer running Novell NetWare/IntranetWare: Restart each
HP NetServer running NetWare/IntranetWare to activate the SNMP agents that
were installed during client setup. (Logging off and on does not constitute a
server restart.) Proceed to Part 3: Verify Correct Installation.
NOTE If you installed your Network Operating System utilizing the
Configuration Assistant "Express mode" or Custom
"Automated mode" from the HP NetServer Navigator CD
(version F.01.05 and later) , you may skip at least Step 1 of the
Windows NT instructions listed below. If you've also set the
SNMP trap destination of your client during the NOS install,
you may skip steps 1 to 3 of the Windows NT instructions
listed below.