HP xw4400 Workstation User Manual
Page 52
HP Remote Graphics 4.2.0 User's Guide
44
3. Enterprise Service Mode: Is similar to Directory Mode, but rather than
looking up the systems assigned to a user in a file, they are looked up using
the RGS Enterprise Service. The RGS Enterprise Service is a network service
that is accessible over a standard computer network. Before the rgreceiver is
started in Enterprise Service Mode, the Enterprise Service must be
installed and running on the network and visible to the Receiver. After the
Enterprise Service is started, the location of the Enterprise Service is entered
on the command-line when starting the Receiver.
•
On Windows, to start the HP Remote Graphics Software Receiver in
Enterprise Service Mode:
cd "C:\Program Files\Hewlett-Packard\Remote Graphics
Receiver"
rgreceiver.exe -esdir service1 [service2 ... serviceN]
•
On Linux or HP-UX, execute:
/opt/hpremote/rgreceiver/rgreceiver.sh -esdir service1
[service2 ... serviceN]
where "service1" is either the hostname or ipaddress of the system that
the Enterprise Service is running on. Multiple hostnames or ipaddresses
can be entered, each separated by white space.