HP xw4400 Workstation User Manual
Page 60
HP Remote Graphics 4.2.0 User's Guide
52
The network timeouts control various timeouts that may occur within HP Remote
Graphics.
•
Error: Specifies the timeout in seconds used to detect and disconnect an
inactive connection.
•
Warning: Specifies the timeout in seconds used to detect and notify the user
of a potential network disruption. If network connectivity is restored before
reaching the error timeout, the warning notification disappears and the user
can continue often without interruption.
•
Dialog: Specifies the timeout in seconds used to display and wait for input
dialog responses from input, such as the
authorization
or
PAM authentication
dialogs.
The Receiver must be disconnected from all Senders to change timeouts. See Using
Timeouts for a detailed discussion on setting timeouts.