HP StorageWorks XP Remote Web Console Software - Manual (Page 26)

When you select a program product in the list, the Partition Status list and Setting box are displayed
under the information on the licensed capacity (see Figure 8 on page 26 and Figure 9 on page 26). The
storage administrator can partition the licensed capacity and allocate to each SLPR using the Partition
Status list and Setting box.
Figure 8 Partition Status List and Setting Box
Figure 9 Setting Box for Program Product with Unlimited Licensed Capacity or that
does Not Depend on Licensed Capacity.
The Partition Status list and the Setting box have the following features:
• The Partition Status list displays the status of the partitioned licensed capacity of the program
product that is selected in the program product list for each SLPR. The Partition Status list consists
of the following items:
• SLPR Name - displays the name of SLPR.
• Used Volume - displays the currently used licensed capacity for the program product that is
selected in the program product list.
• Status - displays the status that is figured out by comparing the allocated licensed capacity
(Permitted Volumes) and used licensed capacity (Used Volumes). The following status can
be displayed:
Installed: When the program product with the unlimited licensed capacity is selected in the
list, this status indicates that the license is allocated to the SLPR. When the program product
that is not with the unlimited licensed capacity is selected in the list, this status indicates that
the partitioned licensed capacity is allocated to the SLPR and the allocated licensed capacity
is more than the capacity of Used Volumes. This status means that the storage partition
administrator can use the program product in the allocated SLPR.
Not Installed: No license and licensed capacity for the selected program product are
allocated to the SLPR.
Capacity Insufficient: The licensed capacity that is allocated to the SLPR (Permitted Volumes)
is less than the currently used licensed capacity (Used Volumes). When the trial period still
remains, the number of remaining days are displayed in parentheses.
Not Enough: The licensed capacity is insufficient though a program product is installed.
• Permitted Volumes - displays nothing when the program product with the unlimited licensed
capacity is selected in the list, or displays the allocated licensed capacity to the SLPR in GB
when the program product that is not with the unlimited licensed capacity is selected in the list.
• The displayed items in the Setting box depend on the program product selected in the list.
When the program product with the unlimited licensed capacity or that does not depend on the
licensed capacity is selected in the list, the Enable button and the Disable button are displayed
(see Figure 9 on page 26). To allocate the license of the selected program product to the SLPR,
select the Enable button. If you do not want to allocate the license of the selected program
product to the SLPR, select the Disable button. When the program product that is not with the
unlimited licensed capacity is selected in the list, the box to enter the capacity is displayed
26 Using the Disk/Cache Partition GUI