HP StorageWorks XP Remote Web Console Software - Manual (Page 29)

• SLPR resource list on the right side of the tree: displays the information for resources in the
specified SLPR, that is, CLPRs and ports. Note: If SLPR0 is selected from the tree, all resources
(CLPRs and ports) that have not been allocated to any SLPRs yet are displayed in the list.
• No.: Row number
• Resource Type: Type of resources of SLPR. Cache Partition or Port(port type).
• Name: Name of CLPR or port
If the resource type is Cache Partition, CLPR number and CLPR name are displayed. If the
resource type is Port, the port name is displayed.
• Properties: Capacity of CLPR and the number of parity groups that are allocated to the
specified CLPR.
• Information: displays the name of channel adapter if the resource type is Port.
• Status: If the resources of SLPR (CLPRs and ports) have been edited, the status of editing
resources is displayed on the right edge of the list.
Create: is shown if CLPR has been added, or migrated from other SLPR.
Delete: is shown if CLPR has been deleted, or migrated to other SLPR. If the resource is a
port, this column is always blank.
• Detail For SLPR
Settings of SLPR that is specified in the tree are displayed. You may change the settings.
• SLPR Name: If you change the SLPR name, you may use alphanumeric up to 32 characters.
• CU (*: In Use): LDKC and CU number that is in the specified SLPR is displayed (00 - FE). The
CU number with an asterisk (*) indicates that the SSID is registered into CU. To delete CU
from the specified SLPR, select the CU from the list and select Delete to return the CU to
the Available CU list.
• Available CU (*: In Use):
LDKC:CU: displays the number of LDKCs and CUs. The CU number with an asterisk (*)
indicates that the SSID is registered into CU.
SLPR: displays the SLPR that the CU belongs to.
SSID (SLPR): displays the SSID if the SSID is registered into a CU. The SLPR that the SSID
belongs to is displayed between parentheses on the right side of SSID.
To add CU to the specified SLPR, select the CU from the list and select Add button to return the
CU to the CU list. The CU number with an asterisk (*) indicates that the SSID is registered into
CU. Up to 510 CUs into which the SSIDs are registered or not can be selected.
Note: If the storage partition administrator uses VLL function, CU should be previously specified
per SLPR to prevent overlapping the newly allocated CU number(s) and the existing CU
number(s) in other SLPR. If CU number(s) are not specified, the storage partition administrator
cannot use VLL function.
• SSID (*: In Use): SSID in the selected SLPR (0004 to FFFE). The SSID number with an asterisk
(*) indicates that the SSID is registered into CU. Note: If a customized volume (CV) is set by
using VLL, and CU No. and SSID are registered to different SLPR, dash (-) is displayed on the
right of SSID. For further information about CVs, see the HP StorageWorks XP24000 Virtual
LVI/LUN (VLL) and Volume Shredder User’s Guide.
• From: The starting number of SSID that is added to the specified SLPR (0004 to FFFE). You
may input SSID that is in SLPR0.
• To: The last number of SSID that is added to the specified SLPR (0004 to FFFE). You may
input up to 2040 SSIDs that are in SLPR0.
Note: To add SSID(s) to SLPR, input the starting number to From:, and the last number to
To:, and then select Add.
Note: If you add the plural SSIDs into the specified SLPR, the number that is input to TO: must
be smaller than the number that is input to From:.
Note: To delete SSID from the SSID box, select SSID from the SSID box, and then select Delete.
Note: If the storage partition administrator uses VLL function, SSID number should be
previously specified per SLPR to prevent overlapping the newly allocated SSID number(s) and
the existing SSID number(s) in other SLPR.
• The Apply button applies settings in the Partition Definition window.
• The Cancel button cancels the settings that are input or selected, and restores the settings to
the initial status.
XP24000 Disk/Cache Partition User's Guide 29