Command options, Command option descriptions, Command options command option descriptions – HP StoreAll Storage User Manual
Page 17
Command options
lists the hpsp_fmt command options that can be used on the StoreAll platforms.
Table 23 Command Options
9320
9300
9730
X9720
8800
8200
Option
✓
NA
NA
NA
NA
NA
-ci, or --ctrlip <ip-address>
✓
NA
NA
NA
NA
NA
-cu, or --ctrluser <username>
✓
NA
NA
NA
NA
NA
-cp, or --ctrlpasswd <password>
✓
✓
✓
✓
NA
NA
-cs, or --credservice
✓
✓
✓
✓
✓
✓
-F, or --format <Text | XML>
✓
✓
✓
✓
✓
✓
-fo, or --force
✓
✓
✓
✓
✓
✓
-o, or --outputfile <Filename>
✓
✓
✓
✓
✓
✓
-r, or --reboot
✓
✓
✓
✓
✓
✓
-s, or --scriptmode
✓
✓
✓
✓
✓
✓
-v, or --verbose
NA
NA
✓
✓
NA
NA
-i, or --ignorerole
NA
NA
✓
NA
NA
NA
-ic, or --ignorediskdualpathcheck
NA
NA
✓
✓
NA
NA
-id, or --deviceid <Device ID>
NA
NA
✓
✓
NA
NA
-oi, or --oaip <ipaddress>
NA
NA
✓
✓
NA
NA
-op, or --oapasswd <password>
NA
NA
✓
✓
NA
NA
-ou, or --oauser <username>
NA
NA
✓
✓
NA
NA
-vu, or --vcuser <username>
Command option descriptions
The descriptions in
explain the results of using the corresponding command
option.
Table 24 Command option descriptions
Description
Option
The storage controller's IP address.
-ci, or --ctrlip
<ip-address>
The use name of the storage controller given by the --ctrlip option. The
user should have administrative/write privileges for the flash operation.
-cu, or --ctrluser
<username>
Read-only privileges are sufficient for the discovery and flash recommendation
operation.
The password for the user account given by the --ctrluser option for the
storage controller given by the --ctrlip option.
-cp, or --ctrlpasswd
<password>
Credential service. Use the credential service to obtain the user credentials for
the storage controller/Onboard Administrator/Virtual Connect. In 9320 and
-cs, or --credservice
9300 configurations, for the active FW version discovery and the flash
recommendation operation, this tool automatically fetches each configured
storage controller IP and its user credentials.
For the flash operation, you must provide this option along with the --ctrlip
option. In this case, the command fetches the user credentials for the given
controller IP address.
Command options
17