HP StoreAll Storage Instruction Manuals and User Guides
We have 9 Instruction Manuals and User Guides for StoreAll Storage HP
Manuals
| Recognized languages: | English |
|---|---|
| Pages: | 47 |
| Size: | 950 KB |
Show table of contents
Read manual
Document Outline
- HP Storage Platform Storage Provisioning Tool for StoreAll User Guide
- Contents
- 1 Introduction
- 2 StoreAll 9730 storage provisioning
- 3 StoreAll 9320 storage provisioning
- 4 StoreAll 8800 storage provisioning
- 5 Troubleshooting
- StoreAll 9730 provisioning failures
- hpsp_spt –ap operation failed with ERROR: 0x4526: Failed to retrieve drive(s) information
- hpsp_spt –vs operation throws Exception in thread "main" java.lang.ArrayIndexOutOfBoundsException: 1 at com.hp.usd.cmp.storage.back.CmpEnclosureGroupList.getCmpEnclosure(CmpEnclosureGroupList.java:140)
- ERROR:0x4724: Drive configuration does not meet known/desired configuration
- ERROR: 0x4725 Failed to locate storage enclosure(s)
- ERROR:0x4979: Unknown storage configuration, cannot proceed with validation
- StoreAll 9320 provisioning failures
- ERROR:0x4976: Partially provisioned storage found, Suggested action: run "--repair" command and rerun "--validateStorage".
- ERROR:0x4342: Failed to reassign the controller for Vdisk: <Vdisk name>.
- hpsp_spt --repair operation failed with ERROR:0x4422: Failed to retrieve volume information
- hpsp_spt operation is hung
- ERROR:0x4112: Failed to connect to the storage controller
- ERROR: 0x4225 Failed to retrieve the credentials for the Controller IP, <IP address>
- StoreAll 8800 provisioning failures
- StoreAll 9730 provisioning failures
- 6 Support and other resources
- 7 Documentation feedback
| Recognized languages: | English |
|---|---|
| Pages: | 294 |
| Size: | 5.65 MB |
Show table of contents
Read manual
Document Outline
- HP StoreAll Storage File System User Guide
- Contents
- 1 Using StoreAll software file systems
- 2 Creating and mounting file systems
- 3 Configuring quotas
- 4 Maintaining file systems
- Best practices for file system performance
- Viewing information about file systems and components
- Extending a file system
- Rebalancing segments in a file system
- Deleting file systems and file system components
- Checking and repairing file systems
- Troubleshooting file systems
- Segment of a file system is accidently deleted
- ibrix_pv -a discovers too many or too few devices
- Cannot mount on a StoreAll client
- NFS clients cannot access an exported file system
- User quota usage data is not being updated
- File system alert is displayed after a segment is evacuated
- SegmentNotAvailable is reported
- SegmentRejected is reported
- ibrix_fs -c failed with "Bad magic number in super-block"
- 5 Using NFS
- Exporting a file system
- Using case-insensitive file systems
- 6 Configuring authentication for SMB, FTP, and HTTP
- 7 Using SMB
- Configuring file serving nodes for SMB
- Starting or stopping the SMB service and viewing SMB statistics
- Monitoring SMB services
- SMB shares
- Linux static user mapping with Active Directory
- Consolidating SMB servers with common share names
- SMB clients
- Permissions in a cross-protocol SMB environment
- Troubleshooting SMB
- 8 Using FTP
- 9 Using HTTP
- HTTP share types
- Uses for the StoreAll REST API
- Features for each file share mode
- Best practices for HTTP REST API shares
- Obtaining the HP StoreAll REST API Sample Client Application
- Checklist for creating HTTP shares
- Best practices for configuring HTTP
- Object mode shares and data retention
- Creating HTTP shares from the GUI
- Tuning the socket read block size and file write block size
- Creating HTTP shares from the CLI
- Starting or stopping the HTTP service manually
- Accessing standard and file-compatible mode HTTP shares
- Configuring Windows clients to access HTTP WebDAV shares
- Troubleshooting HTTP
- 10 HTTP-REST API object mode shares
- Terminology for StoreAll REST API object mode
- Tutorial for using the HTTP StoreAll REST API object mode
- Viewing the list of containers for an account
- Viewing the contents of a container
- Finding the corresponding object ID from a hash name
- Finding the corresponding hash name from an object ID
- Commands for object mode
- 11 HTTP-REST API file-compatible mode shares
- 12 Managing SSL certificates
- 13 Using remote replication
- Overview
- Configuring the target export for replication to a remote cluster
- Configuring and managing replication tasks on the GUI
- Configuring and managing replication tasks from the CLI
- Replicating WORM/retained files
- Configuring remote failover/failback
- Understanding the ibrcfrworker log file (ibrcfrworker.log)
- Troubleshooting remote replication
- 14 Managing data retention
- 15 Express Query
- 16 Configuring Antivirus support
- 17 Creating StoreAll software snapshots
- 18 Creating block snapshots
- 19 Using data tiering
- 20 Using file allocation
- 21 Support and other resources
- 22 Documentation feedback
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 93 |
| Size: | 1.92 MB |
Show table of contents
Read manual
Document Outline
- HP Storage Platform Firmware Management Tool for StoreAll User Guide
- Contents
- 1 Introduction
- 2 Firmware update strategy
- 3 Command reference
- 4 StoreAll 8800 and 8200 FMT command reference and examples
- 5 StoreAll 9730 and IBRIX X9720 FMT command reference and examples
- 6 StoreAll 9320 and 9300 FMT command reference and examples
- 7 Troubleshooting
- General tool failures
- StoreAll 9730/IBRIX X9720 chassis components
- SAS switch discovery/flash recommendation/flash failure with one of the errors: 0x105E, 0x1047, 0x1A22
- Any operation on OA or VC failed with error: 0x1A13
- Any operation on SAS switch failed with error: 0x1A13
- Flash not attempted for VC with error: 0x1051
- Flash not attempted for SAS switch with error: 0x104C
- Flash not attempted for any chassis component with one of the errors: 0x1041, 0x103D
- Flash not attempted for SAS switch with error code: 0x1043
- VC reset failure with error code: 0x1A32
- SAS switch flash conditionally succeeded with Error: 0x1007
- ILO2 flash failed with Error: 0x106A
- Discovery and flash recommendation of NIC failed with Error: 0x1A0E
- Any server component Flash failed with Error: 0x1040
- Flash operation of NIC failed with Error: 0x1011
- IBRIX X9720 storage components
- StoreAll 9730 server components
- StoreAll 9730 storage components
- StoreAll 9300/9320 server components
- StoreAll 9320 storage components
- Any storage components flash recommendation failed with Error: 0x1A2C
- Any Storage Components flash operation failed with Error: 0x1A2C
- Enclosure_HDD flash failed with Error: 0x1A2C
- Enclosure_HDD flash failed with Error: 0x1011
- Any Storage component Flash failed with Error: 0x1040
- Any Storage component discovery/flash recommendation/flash failed with Error: 0x1A2D
- 8 Support and other resources
- 9 Documentation feedback
| Recognized languages: | English |
|---|---|
| Pages: | 165 |
| Size: | 6.77 MB |
Show table of contents
Read manual
Document Outline
- HP X9000 File Serving Software File System User Guide
- Contents
- 1 Using X9000 Software file systems
- 2 Creating and mounting file systems
- 3 Setting up quotas
- 4 Maintaining file systems
- Best practices for file system performance
- Viewing information about file systems and components
- Extending a file system
- Rebalancing segments in a file system
- Disabling 32-bit mode on a file system
- Deleting file systems and file system components
- Checking and repairing file systems
- Troubleshooting file systems
- 5 Using NFS
- Exporting a file system
- Autoconnecting NFS clients
- Setting up NFS clients
- Using case-insensitive file systems
- 6 Configuring authentication for CIFS, FTP, and HTTP
- 7 Using CIFS
- Configuring file serving nodes for CIFS
- Starting or stopping the CIFS service and viewing CIFS statistics
- CIFS shares
- Linux static user mapping with Active Directory
- Consolidating SMB servers with common share names
- CIFS clients
- Permissions in a cross-protocol CIFS environment
- Troubleshooting CIFS
- 8 Using FTP
- 9 Using HTTP
- 10 Managing SSL certificates
- 11 Using remote replication
- 12 Managing data retention and validation
- 13 Creating X9000 software snapshots
- 14 Creating block snapshots
- 15 Using data tiering
- 16 Using file allocation
- 17 Support and other resources
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 209 |
| Size: | 7.95 MB |
Show table of contents
Read manual
Document Outline
- HP IBRIX X9000 Network Storage System File System User Guide
- Contents
- 1 Using X9000 Software file systems
- 2 Creating and mounting file systems
- 3 Setting up quotas
- 4 Maintaining file systems
- Best practices for file system performance
- Viewing information about file systems and components
- Extending a file system
- Rebalancing segments in a file system
- Disabling 32-bit mode on a file system
- Deleting file systems and file system components
- Checking and repairing file systems
- Troubleshooting file systems
- ibrix_pv -a discovers too many or too few devices
- Cannot mount on an X9000 client
- NFS clients cannot access an exported file system
- User quota usage data is not being updated
- File system alert is displayed after a segment is evacuated
- SegmentNotAvailable is reported
- SegmentRejected is reported
- ibrix_fs -c failed with "Bad magic number in super-block"
- 5 Using NFS
- Exporting a file system
- Using case-insensitive file systems
- 6 Configuring authentication for CIFS, FTP, and HTTP
- 7 Using CIFS
- Configuring file serving nodes for CIFS
- Starting or stopping the CIFS service and viewing CIFS statistics
- Monitoring CIFS services
- CIFS shares
- Linux static user mapping with Active Directory
- Consolidating SMB servers with common share names
- CIFS clients
- Permissions in a cross-protocol CIFS environment
- Troubleshooting CIFS
- 8 Using FTP
- 9 Using HTTP
- 10 Managing SSL certificates
- 11 Using remote replication
- 12 Managing data retention and validation
- 13 Configuring Antivirus support
- 14 Creating X9000 software snapshots
- 15 Creating block snapshots
- 16 Using data tiering
- 17 Using file allocation
- 18 Support and other resources
- 19 Documentation feedback
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 50 |
| Size: | 1.28 MB |
Show table of contents
Read manual
Document Outline
- X9720 Network Storage System Controller User Guide
- Table of Contents
- 1 Overview
- 2 Components
- 3 Basic operation
- 4 LED descriptions
- 5 Troubleshooting
- 6 Support and other resources
- A Parts catalog
- B Rack and environmental requirements
- C Electrostatic discharge
- D Specifications
- E Regulatory compliance notices
- Regulatory compliance identification numbers
- Federal Communications Commission notice
- Declaration of conformity for products marked with the FCC logo, United States only
- Modifications
- Cables
- Canadian notice (Avis Canadien)
- European Union regulatory notice
- Disposal of waste equipment by users in private households in the European Union
- Japanese notice
- BSMI notice
- Korean notice
- Power cord statement for Japan
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 254 |
| Size: | 10.17 MB |
Show table of contents
Read manual
Document Outline
- HP IBRIX 9000 Storage File System User Guide
- Contents
- 1 Using IBRIX software file systems
- 2 Creating and mounting file systems
- 3 Configuring quotas
- 4 Maintaining file systems
- Best practices for file system performance
- Viewing information about file systems and components
- Extending a file system
- Rebalancing segments in a file system
- Deleting file systems and file system components
- Checking and repairing file systems
- Troubleshooting file systems
- Segment of a file system is accidently deleted
- ibrix_pv -a discovers too many or too few devices
- Cannot mount on an IBRIX 9000 client
- NFS clients cannot access an exported file system
- User quota usage data is not being updated
- File system alert is displayed after a segment is evacuated
- SegmentNotAvailable is reported
- SegmentRejected is reported
- ibrix_fs -c failed with "Bad magic number in super-block"
- 5 Using NFS
- Exporting a file system
- Using case-insensitive file systems
- 6 Configuring authentication for SMB, FTP, and HTTP
- 7 Using SMB
- Configuring file serving nodes for SMB
- Starting or stopping the SMB service and viewing SMB statistics
- Monitoring SMB services
- SMB shares
- Linux static user mapping with Active Directory
- Consolidating SMB servers with common share names
- SMB clients
- Permissions in a cross-protocol SMB environment
- Troubleshooting SMB
- 8 Using FTP
- 9 Using HTTP
- HTTP share types
- Process checklist for creating HTTP shares
- Best practices for configuring HTTP
- Managing HTTP from the GUI
- Tuning the socket read block size and file write block size
- Managing HTTP from the CLI
- Starting or stopping the HTTP service manually
- Accessing shares
- Configuring Windows clients to access HTTP WebDAV shares
- Troubleshooting HTTP
- 10 Managing SSL certificates
- 11 Using remote replication
- 12 Managing data retention
- 13 Express Query
- Managing the metadata service
- Metadata and synchronized server times
- Managing auditing
- StoreAll REST API
- 14 Configuring Antivirus support
- 15 Creating IBRIX software snapshots
- 16 Creating block snapshots
- 17 Using data tiering
- 18 Using file allocation
- 19 Support and other resources
- 20 Documentation feedback
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 125 |
| Size: | 5.54 MB |
Show table of contents
Read manual
Document Outline
- X9000 File Serving Software File System User Guide
- Contents
- 1 Using X9000 Software file systems
- 2 Creating and mounting file systems
- 3 Setting up quotas
- 4 Maintaining file systems
- 5 Using NFS
- 6 Configuring authentication for CIFS, FTP, and HTTP
- 7 Using CIFS
- Configuring file serving nodes for CIFS
- Starting or stopping the CIFS service and viewing CIFS statistics
- CIFS shares
- Linux static user mapping with Active Directory
- Consolidating SMB servers with common share names
- CIFS clients
- Permissions in a cross-protocol CIFS environment
- Troubleshooting CIFS
- 8 Using FTP
- 9 Using HTTP
- 10 Managing SSL certificates
- 11 Using remote replication
- Overview
- Configuring the target for remote replication
- Configuring and managing replication tasks on the GUI
- Configuring and managing replication tasks from the CLI
- Starting a remote replication task to a remote cluster
- Starting an intra-cluster remote replication task
- Starting a run-once directory replication task
- Stopping a remote replication task
- Pausing a remote replication task
- Resuming a remote replication task
- Querying remote replication tasks
- Viewing replication status and activity
- Configuring remote failover/failback
- Troubleshooting remote replication
- 12 Creating snapshots
- 13 Using data tiering
- 14 Using file allocation
- 15 Support and other resources
- Glossary
- Index
| Recognized languages: | English |
|---|---|
| Pages: | 406 |
| Size: | 15.97 MB |
Show table of contents
Read manual
Document Outline
- HP StoreAll OS User Guide
- Contents
- 1 Using StoreAll software file systems
- 2 Creating and mounting file systems
- 3 Configuring quotas
- 4 Maintaining file systems
- Best practices for file system performance
- Viewing information about file systems and components
- Extending a file system
- Rebalancing segments in a file system
- Deleting file systems and file system components
- Checking and repairing file systems
- Troubleshooting file systems
- Deleting file systems that are enabled for data retention
- Segment of a file system is accidently deleted
- ibrix_pv -a discovers too many or too few devices
- Cannot mount on a StoreAll client
- NFS clients cannot access an exported file system
- User quota usage data is not being updated
- File system alert is displayed after a segment is evacuated
- SegmentNotAvailable is reported
- SegmentRejected is reported
- Segment evacuation task might fail after an upgrade
- Query freshness affected in configuration of a large file system with light activity
- 5 Using NFS
- 6 Configuring authentication for SMB, FTP, and HTTP
- Overview
- Using LDAP as the primary authentication method
- Using Active Directory with LDAP ID mapping
- Configuring NIS
- Configuring authentication from the StoreAll Management Console
- Viewing or changing authentication settings
- Provider stacking
- Configuring authentication from the CLI
- Configuring shell access
- Configuring delegated users for an Active Directory domain
- 7 Using SMB
- Configuring nodes for SMB
- Starting or stopping the SMB service and viewing SMB statistics
- Monitoring SMB services
- SMB shares
- Linux static user mapping with Active Directory
- HP-SMB user name mapping
- Consolidating SMB servers with common share names
- SMB clients
- Permissions in a cross-protocol SMB environment
- Using Robocopy on a data retention-enabled HP-SMB share
- Troubleshooting SMB
- 8 Using FTP
- 9 Using Object Store
- Creating an Object Store
- Permission levels
- Creating administrator groups and assigning users
- Changing group administrative privileges
- Creating tokens for authentication
- Managing non-administrative accounts
- Using cURL commands for managing Object Store
- Finding the Fusion Manager user VIF
- Keystone ports
- Format of the endpoint
- Creating containers
- Upload an object to a container
- Posting metadata to an object
- Posting metadata to a container
- Downloading an object from a container
- Viewing the contents of a container
- Deleting an object from a container
- Deleting a container
- Viewing a status of a user account
- Listing tenants
- Synchronization of containers
- Managing and monitoring Object Store
- Troubleshooting Object Store
- 10 Using HTTP
- Overview
- HTTP share types
- Uses for the StoreAll REST API
- Features for each file share mode
- Best practices for HTTP REST API shares
- Obtaining the HP StoreAll REST API Sample Client Application
- Checklist for creating HTTP shares
- Best practices for configuring HTTP
- Object mode shares and data retention
- Creating HTTP shares from the HP StoreAll Management Console
- Tuning the socket read block size and file write block size
- Starting or stopping the HTTP service manually
- Accessing standard and file-compatible mode HTTP shares
- Configuring Windows clients to access HTTP WebDAV shares
- Troubleshooting HTTP
- 11 HTTP-REST API object mode shares
- Terminology for StoreAll REST API object mode
- Using the HTTP StoreAll REST API object mode
- Viewing the list of containers for an account
- Viewing the contents of a container
- Finding the corresponding object ID from a hash name
- Finding the corresponding hash name from an object ID
- Commands for object mode
- 12 HTTP-REST API file-compatible mode shares
- 13 Managing SSL certificates
- 14 Using continuous remote replication
- Overview
- Configuring the target export for replication to a remote cluster
- Configuring and managing replication tasks
- Replicating WORM/retained files
- Configuring remote failover/failback
- Enabling and disabling custom metadata replication
- Understanding the ibrcfrworker log file (ibrcfrworker.log)
- Troubleshooting remote replication
- Troubleshooting custom metadata replication
- 15 Managing data retention
- Overview
- Configuring file systems for WORM/data retention
- Managing WORM and retained files
- How autocommit and data retention are calculated
- Running data validation scans
- Creating data retention reports
- Using hard links with WORM files
- Using remote replication
- Backup support for data retention
- Troubleshooting data retention
- 16 Express Query
- Managing the metadata service
- Metadata and synchronized server times
- Managing auditing
- Freshness
- Truncated path names
- Filesystem Metadata Cleaner
- Online Metadata Synchronizer
- Express Query and special files
- Express Query Windows Search Integration (EQWSI)
- Requirements for creating an EQWSI-enabled HTTP share or enabling EQWSI on a pre-existing HTTP share
- Enabling EQWSI on a pre-existing HTTP share
- Requirements for creating a Windows Explorer Search Plug-in
- Creating a Windows Explorer Search Plug-in
- Requirements for EQWSI queries
- Running an EQWSI query
- Description of the data displayed in the Windows Explorer for EQWSI queries
- Download or browse a file listed by an EQWSI query
- HTTP 404 error page displayed after double-clicking a file or directory listed by an EQWSI search
- 17 Generating reports
- 18 Obtaining performance statistics
- 19 Configuring Antivirus support
- 20 Creating StoreAll software snapshots
- File system limits for snap trees and snapshots
- Configuring snapshot directory trees and schedules
- Managing software snapshots
- Moving files between snap trees
- Backing up snapshots
- 21 Creating block snapshots
- 22 Using data tiering
- 23 Using file allocation
- 24 Support and other resources
- 25 Documentation feedback
- Glossary
- Index