HP 3PAR Recovery Manager Software - Manual (Page 162)

Table 10 HP 3PAR Recovery Manager Software for Microsoft Exchange Event Messages (continued)
Description/Action Error Message Event ID
A conflict was detected regarding the specified repository relocation
path.
•
Verify the path given for repository relocation.
RME3164: ERROR: There is a
conflict with the specified path
for repository relocation. 3164
The specified virtual copy could not be located in the repository.
• Check the syntax for the HpRmCli Exch backup command.
RME3173: ERROR: The Virtual
Copy is not found in the
repository, check if parameters
are correct. 3173
A verification error for the snapshot operation occurred.
•
Run HpRmCli Exch validate to verify that the snapshot was
created.
RME3176: ERROR: Verification
has encountered an error.
Please run Validate command
on this snapshot. 3176
An error occurred during the backup.
• Check the HpRmCli Exch backup command parameters to ensure
that the correct policy name is used.
RME3198: ERROR: Backup
error occurred. Check to see if
your policy name is correct. 3198
The Symantec NetBackup process has generated an error. RME3200: ERROR: NetBackup
process has failed with error 3200
• Verify that NetBackup is installed properly and verify that the bin
subfolder is specified in the PATH environment variable.
code <Error Code>. Check if
NetBackup is included in
•
Refer to NetBackup documentation for information on the error code. environment variable "PATH".
Consult NetBackup manual for
this error code.
162 Event Messages