HP 3PAR Recovery Manager Software - Manual (Page 176)

Table 10 HP 3PAR Recovery Manager Software for Microsoft Exchange Event Messages (continued)
Description/Action Error Message Event ID
Could not access the HP 3PAR StoreServ Storage System. RME3243: ERROR: Failed to log
in to Storage System due to
invalid username or password. 3243
•
Check whether the HP 3PAR VSS Provider Software can access the
HP 3PAR StoreServ Storage System with the registered credentials.
• Run provcfg inserv -detail.
•
Refer to the HP 3PAR VSS Provider Software User's Guide for more
details.
To set up synchronous Remote Copy, see Chapter 11, “Remote Copy
for Recovery Manager.” RME3247: ERROR: Please use
a version of VSS Provider that 3247
supports synchronous Remote
Copy virtual copies, and enable
synchronous remote virtual
copies.
You must install the Symantec NetBackup client to perform backups
using NetBackup.
• To set up Symantec NetBackup, see Chapter 4, “Configuring Backup
Software.”
RME5526: ERROR: Recovery
Manager for Exchange does not
support this particular
NetBackup model. 5526
NetBackup does not appear to be installed on the specified host.
• Verify that the NetBackup client is installed correctly on the backup
client <host name>.
RME5528: ERROR: Check
NetBackup client installation on
<host name>. 5528
Installation files might be corrupted or missing. omnib.exe does not
seem to exist. RME5531: ERROR: Check Data
Protector client installation on
<host name>. 5531
• Verify that the Data Protector client is installed correctly on the backup
client <host name>.
•
Verify that the correct omnidl patch for Data Protector is installed.
omnidl.exe does not appear to exist. RME5530: ERROR: Check Data
Protector client installation on 5530
•
Verify that the Data Protector client is installed correctly on the backup
client.
<host name>. Could not find file
<Data Protector Home> \\bin\
\utilns\\omnidl.exe
.
• Verify that the correct omnidl patch is installed for Data Protector.
176 Event Messages