HP 3PAR Recovery Manager Software - Manual (Page 35)

Configuring HP Data Protector
Requirements
•
HP Data Protector Software
•
Each data list name (also known as the backup specification) must be unique across the entire
system
Setting Up the HP Data Protector Backup Specification
To use HP Data Protector with HP 3PAR Recovery Manager, you must set up a default backup
specification. The backup specification specifies the default mount point and the necessary devices
for tape backup.
1.
Open the Data Protector GUI.
2. Select Backup
→Add Backup.
3. In the Create New Backup dialog box, select Blank_Filesystem_Backup and click OK.
4. Click Next (do not select any items).
5. Select the device that Data Protector is to use for backups.
6. Click Next until the Manual add... appears.
7. Click Manual add...
8. Select Windows filesystem and click Next.
9. Enter the appropriate client system, mount point, and description. HP recommends:
<server_used_as_backup_client> Client system
C: Mount point
default Description
NOTE: HP 3PAR Recovery Manager uses this information only to create a backup template.
HP 3PAR Recovery Manager does not use the actual data entered.
10. Click Next until the Finish button appears. Click Finish.
11. Save the backup specification.
When you issue the HpRmCli Exch backup command with the -dl option, use the name
with which you saved the backup specification (e.g., DPbackup) as the value of the -dl
option.
Setting Up HP Data Protector Cell Manager Access
To use HP Data Protector with HP 3PAR Recovery Manager, you must enable the system accounts
on the registered client system to access the Data Protector Cell Manager.
1.
Open the Data Protector GUI.
2. In the toolbar drop-down list, select Users.
3. Under the Users folder in the left pane, choose admin, and then choose SYSTEM.
4. In the Client system drop-down list on the General tab in the right pane (or General/Properties
of the Data Protector User tab for Exchange 2007), select <Any>.
For more information on installing HP Data Protector, see HP Data Protector documentation.
Configuring HP Data Protector 35