HP 3PAR Recovery Manager Software - Manual (Page 67)

Examples
The following commands will analyze existing repository and output any out-of-sync information.
Use quotes ("") for names that include spaces.
•
(For Exchange 2010/ Exchange 2013) HpRmCli Exch analyze -mdb mydb2 -inserv
214
•
(For Exchange 2010/ Exchange 2013) HpRmCli Exch analyze -mdb "mailbox
database 2"
•
(For Exchange 2007) HpRmCli Exch analyze -s bottlenosed -g "First storage
group"
•
(For Exchange 2007) HpRmCli Exch analyze -s bottlenosed -g "First storage
group" -b NBU
HpRmCli Exch backup
SYNTAX
(For Exchange 2010/ Exchange 2013) HpRmCli Exch backup -mdb <mailbox_DB_name>
-s <ExchangeServer> [-defer|-nc|-t <Timestamp>] [-mpl] -vs
<verification_server/backup_server> [-p <policyName>] [-d
<fullScheduleName>] [-m <masterServer>] [-mp <“mountpoint”>] [-remove]
[-noemail] [-dl DataListName] [-domain <DomainName>][-be - mediaserver
<mediaservername> -device <devicename> [-level log|full]
(For Exchange 2007)HpRmCli Exch backup <-s ExchangeServer> <-g storagegroup>
[-domain DomainName] [-active|-passive] [-lcr] [[-dl DatalistName> |
[-p policyName -d fullScheduleName -m masterServer] | [-be -mediaserver
mediaservername -device devicename]] [-t timestamp [-mp]] [-defer|-nc]
[-remove]
DESCRIPTION
The HpRmCli Exch backup command backs up a virtual copy to media, or creates a virtual
copy and backs up to media (also known as a quick backup). For the later case, no timestamp is
needed.
PARAMETERS
The following options are supported:
•
(For Exchange 2010/ Exchange 2013)-mdb <mailbox_DB_name> - The name of the
mailbox database to back up.
•
-s <ExchangeServer> - The name of the Exchange server.
•
-defer - Optional. Specify this option to defer the Exchange log truncation after the successful
backup is confirmed in automatic creation. This option cannot be used with the -t option.
NOTE: The -defer option is not supported when the HP 3PAR Recovery Manager for
Exchange backup server is the same as the production server.
NOTE: The -defer option defers log truncation until backup completion. This keeps the
Exchange writer in the “waiting for completion” state for that period.
•
-nc - Optional. Skips the integrity check (not recommended). This cannot be used with the
-t option.
•
–t <Timestamp> - Optional. The timestamp of the virtual copy to back up. Use if the virtual
copy has already been created. Do not use to create a virtual copy and then perform a backup.
HpRmCli Exch backup 67