HP 3PAR Recovery Manager Software - Manual (Page 89)

HpRmCli Exch reset
SYNTAX
To reset the HP 3PAR Recovery Manager for Exchange locking on remote Windows host:
HpRmCli Exch reset -s <ExchangeServer> -t <timestamp> -opt lock [-domain
<DomainName>]
(For Exchange 2010/ Exchange 2013) To reset the mount status of a particular timestamp record:
HpRmCli Exch reset -s <ExchangeServer> -mdb <mailbox_DB_name> -t
<timestamp> -opt status [-domain <DomainName>]
(For Exchange 2007) To reset the mount status of a particular timestamp record:
HpRmCli Exch reset <-s ExchangeServer> <-g StorageGroup> <-t timestamp>
<-opt status> [-domain <DomainName>]
DESCRIPTION
The HpRmCli Exch reset command resets a virtual copy mounting status in the repository
record and internal process locking status on any designated HP 3PAR Recovery Manager for
Exchange installed system with only the status option being supported. Executing this command
with the status option will force the removal of currently exposed VLUNs and set the mounting
status to "Available".
PARAMETERS
The following options are supported:
•
-domain <DomainName> - Optional. Domain name to which mailbox database or storage
group belongs
•
(For Exchange 2010/ Exchange 2013) -mdb <mailbox_DB_name> - The name of the
mailbox database.
•
-s <ExchangeServer> - The name of the exchange server to which the storage group or
mailbox database belongs. If the host is in another domain, specify the FQDN.
•
(For Exchange 2007) -g <StorageGroup> - The name of the storage group to which the
virtual copy timestamp belongs.
•
–t <Timestamp> - Optional - The timestamp of the virtual copy. Requires the -opt status
option.
•
-opt <Option> - Specifies whether to reset the locking or mounting status. Currently
supported options are lock and status. The lock option is only used to unlock HP 3PAR
Recovery Manager for Exchange from previous virtual copy creation failure caused by
unexpected termination.
NOTE: Reset status of a specific timestamp will force the removal of currently exposed VLUNs.
NOTE: Use quotes ("") for names that include spaces.
NOTE: When HP 3PAR Recovery Manager for Exchange is processing user requests, it will
activate an internal locking mechanism. Any incoming request will get Server <system name>
has a Recovery Manager command running already
message. Wait until it finishes
before continuing. However, in case of unexpected termination, the locking status may not get
deactivated properly. Use this command to release the lock for the operation to go back to normal
status.
HpRmCli Exch reset 89