HP Intelligent Management Center Standard Software Platform - Manual (Page 44)

• A red X means that the feature or subfeature is either unavailable or will
not be installed.
Crystal Reports uses an "install on-demand" technology for some of its
features. As a result, the very first time a particular feature is used after being
installed, there may be an extra wait for the "install on-demand" to complete.
This behavior will affect new installations only once and will not occur when
features are restarted.
To select the configuration and location of a feature or subfeature, click its
icon.
Note:
Each feature or subfeature can have its own configuration and location.
Use the following table to determine your installation options for each feature
or subfeature:
Description of what is installed Type of feature installation
• Installs the feature on the local
hard drive.
• Uses the Typical install settings
to install some of the feature's
subfeatures to the local hard
drive.
Will be installed on local hard drive
• Installs the feature and all of its
subfeatures on the local hard
drive.
Entire feature will be installed on lo-
cal hard drive
• Installs the feature or subfeature
from the product distribution/net-
work when first used.
Feature will be installed when re-
quired
• Neither the feature nor its subfea-
tures are installed.
Entire feature will be unavailable
44 Crystal Reports 2008 SP3 User's Guide
Installing Crystal Reports 2008 SP3 3
Customizing your installation