HP Integrity NonStop H-Series - Manual (Page 41)

Administration
WVP NonStop Storage Analyzer User Guide – 536988-001
- 41 -
Note1: The changed settings do not come into effect until after the next run of the collector. In other
words, the SA Host reads the configuration file after it has finished collecting for that day and it only
runs once every day. So, if the user changes the run time the following are possible scenarios:
Note 2: It is
recommended
that only one
instance of
NSA be run for
a given node,
because
multiple
instances may
cause conflicts
in the
$Volume used
for the Store
Volume. For
example, if two
or more
instances of
NSA are set
up to create
data files in
same location
($<vol>.SAYYMMDD), the SA collector that is scheduled first will be the owner of the daily data files.
This may result in inconsistent data (i.e. multiple snapshots of the same data) or file security issues.
[Back to TOC]
Table 8 Collector run scenarios
Original Run
time New Run time Has run today? Effect on
Collection
1:00 pm 8:00 pm (later
than the original
schedule) No (i.e. current
time is prior to
1pm) Collector will run at
1:00 pm today and
will run at 8:00 pm
from the next day
onward.
1:00 pm 8:00 pm (later
than the original
schedule) Yes Collector will run at
1:00 pm the next
day ,read the new
settings and run at
8:00 pm from the
next day onward.
Note that it will not
run again today.
1:00 pm 10:00 am (before
the original
schedule) No Collector will run at
1:00 pm today and
will run at 10:00
am from the next
day onward.
1:00 pm 10:00 am( before
the original
schedule) Yes Collector will run at
1:00 pm today,
read the new
settings and run at
10:00 am from the
next day onward.