Copy settings, Copy quality – HP LaserJet M1120 Multifunction Printer User Manual
Page 64
Reduction/enlargement settings
●
Original=100%
●
A4 > Ltr=94%
●
Ltr > A4=97%
●
Full Page=91%
●
2 pages/sheet
●
4 pages/sheet
●
Custom: 25-400%
NOTE:
When using the 2 pages/sheet or 4 pages/sheet setting, select the page orientation (portrait
or landscape).
Copy settings
Copy quality
Five copy-quality settings are available: Text, Draft, Mixed, Film photo, and Picture.
The factory-set default for copy quality is Text. This setting is the best for items that contain mostly text.
When making a copy of a photo or graphic, you can select the Film photo setting for photos or the
Picture setting for other graphics to increase the quality of your copy. Select the Mixed setting for
documents that include both text and graphics.
Adjust the copy quality for the current job
1.
On the product control panel, press
More Copy Settings
twice to see the current quality setting for
the copy.
2.
Use the arrow buttons to scroll through the quality setting options.
3.
Select a setting, and then press
Start Copy
to save the selection and immediately start the copy
job, or press
OK
to save the selection without starting the job.
NOTE:
The change in the setting remains active for about 2 minutes after the copy job has been
completed. During this time, Custom settings appears on the product control-panel display.
Adjust the default copy quality
1.
On the product control panel, press
Setup
.
2.
Use the arrow buttons to select Copy setup, and then press
OK
.
3.
Use the arrow buttons to select Default quality, and then press
OK
.
4.
Use the arrow buttons to select the copy quality, and then press
OK
to save the selection.
54
Chapter 8 Copy
ENWW